7
Introduction—First Steps
Attaching the Camera Strap
Attach the strap as shown below.
Detaching Lenses
Be sure the camera is off when removing or exchang-
ing lenses. To remove the lens, press and hold the lens-
release button while turning the lens clockwise.
2
Keep ing the mounting index on the lens
aligned with the mounting index on the
cam era body, position the lens in the cam-
era’s bayonet mount. Being careful not to
press the lens-release button, ro tate the lens
counter-clockwise until it clicks into place.
Attaching a Lens
Care should be taken to prevent dust from entering the camera when the
lens is removed.
1
Turn the camera off and remove the body
cap. Remove the rear lens cap from the
lens.
First Steps
Aperture Ring
If the lens is equipped with an aperture ring, lock aperture at the minimum setting
(highest f/-number). See the lens manual for details.
To Next Page
Loading...
