60
Reference—Viewing Photographs on a Computer
Connecting the USB Cable
1
Turn the computer on and wait for it to start up.
3
Turn the camera on. If Mass Storage is
selected for USB, the control panel and
viewfi nder will display the icons shown at
right (this display is not shown when PTP is
selected). Photographs can be transferred to
the computer as described in the PicturePro-
ject Reference Manual (on the silver CD).
2
Turn the camera off and connect the supplied
USB cable as shown. Do not use force or at-
tempt to insert the connectors at an angle.
Connect the camera directly to the comput-
er; do not connect the cable via a USB hub or
keyboard.
To Next Page
Loading...
