Nikon D700 - First Steps

VBA22001-R.3754.A
・Peel off the TAPE #TA-0005 (10 × 20).
・
Unsolder at four places, and pull out the FPC-end of the shutter unit (#B12001) through the hole of the penta
FPC unit (#B5005).
Separation of Front body from Rear body
Screw (#1525)
・
Take out the screw (#1525).
Shutter unit (#B12001)
Penta FPC unit (#B5005)
TAPE #TA-0005（10 × 20）
October.02.2008
Changed page (Overall revision) - D52 ･ D700 -
INC