80
Z
The selected value is shown in the viewfinder while the dial is in
motion.
At values other than 0, the 0 at the center of
the exposure indicators will flash (exposure
modes P, S, and A only) and a E icon will be displayed once a value
is selected.
Normal exposure can be restored by setting exposure
compensation to 0.
±0 EV –0.3 EV +2.0 EV
A Exposure Mode M
In exposure mode M, exposure compensation affects only the exposure
indicator; shutter speed and aperture do not change.
A Using a Flash
When a flash is used, exposure compensation affects both flash level
and exposure, altering the brightness of both the main subject and the
background. Custom Setting e4 (Exposure comp. for flash, 0 259) can
be used to restrict the effects of exposure compensation to the
background only.
A See Also
For information on automatically varying exposure, flash level, white
balance, or Active D-Lighting, see page 136.
To Next Page
Loading...
