286
U
View the current camera firmware version.
D Eye-Fi Cards
Eye-Fi cards may emit wireless signals when Disable is selected.
If a
warning is displayed in the monitor (0 349), turn the camera off and
remove the card.
See the manual provided with the Eye-Fi card, and direct any inquiries
to the manufacturer.
The camera can be used to turn Eye-Fi cards on
and off, but may not support other Eye-Fi functions.
Some cards may not be available in some countries or regions; consult
the manufacturer for more information.
Eye-Fi cards are for use only in
the country of purchase.
Be sure the Eye-Fi card firmware has been
updated to the latest version.
A Using Eye-Fi Cards in Ad Hoc Mode
Additional time may be required when connecting using Eye-Fi cards
that support ad hoc mode.
Set Custom Setting c2 (Standby timer,
0 251) to 30 s or longer.
Firmware Version
G button ➜ B setup menu
To Next Page
Loading...
