285
U
This option is displayed only when an Eye-Fi memory card
(available separately from third-party suppliers) is inserted in the
camera.
Choose Enable to upload photographs to a preselected
destination.
Note that pictures will not be uploaded if signal
strength is insufficient.
Observe all local laws concerning wireless devices and choose
Disable where wireless devices are prohibited.
When an Eye-Fi card is inserted, its status is
indicated by an icon in the information
display:
• d: Eye-Fi upload disabled.
• e: Eye-Fi upload enabled but no pictures
available for upload.
• f (static): Eye-Fi upload enabled; waiting to begin upload.
• f (animated): Eye-Fi upload enabled; uploading data.
• g: Error — camera can not control Eye-Fi card.
If a flashing
W appears in the control panel or viewfinder, refer to
page 349; if this indicator is not flashing, pictures can be taken
normally but you may be unable to change Eye-Fi settings.
Eye-Fi Upload
G button ➜ B setup menu
To Next Page
Loading...
