326
n
Attaching a Power Connector and AC
Adapter
Turn the camera off before attaching an optional power connector
and AC adapter.
1 Ready the camera.
Open the battery-chamber/
memory card slot (q) and
power connector (w) covers.
2 Insert the EP-5A power
connector.
Be sure to insert the connector
in the orientation shown, using
the connector to keep the
battery latch pressed to one
side.
The latch locks the
connector in place when the
connector is fully inserted.
3 Close the battery-chamber/
memory card slot cover.
Position the power connector
cable so that it passes through
the power connector slot and
close the battery-chamber/
memory card slot cover.
To Next Page
Loading...
