102
J
Modifying Picture Controls
Existing preset or custom Picture Controls (0 106) can be
modified to suit the scene or the user’s creative intent.
Choose a
balanced combination of settings using Quick adjust, or make
manual adjustments to individual settings.
1 Select a Picture Control.
Highlight the desired Picture
Control in the Picture Control
list (0 100) and press 2.
2 Adjust settings.
Press 1 or 3 to highlight the
desired setting (0 103) and
press 4 or 2 to choose a value.
Repeat this step until all
settings have been adjusted, or
select Quick adjust to choose a preset combination of
settings.
Default settings can be restored by pressing the O
button.
3 Press J.
A Modifications to Original Picture Controls
Picture Controls that have been modified from
default settings are indicated by an asterisk (“E”).
To Next Page
Loading...
