Nikon Df - F5: Assign Preview Button

266
U
❚❚ Press + command dials
Selecting Press + command dials displays the following options:
Choose the role played by the Pv button,
either by itself (Press) or when used in
combination with the command dials
(Press + command dials).
The options
available are the same as for Assign Fn
button (0 263).
The default options for
Press and Press + command dials are Preview (0 41) and None,
respectively.
Option Description
5
Choose
image area
Keeping the Fn button pressed, rotate a command
dial to choose an image area (0 51).
w
Choose non-
CPU lens
number
Keeping the Fn button pressed, rotate a command
dial to choose a lens number specified using the Non-
CPU lens data option (0 163).
y
Active
D-Lighting
Keeping the Fn button pressed, rotate a command
dial to adjust Active D-Lighting (0 110).
U
HDR (high
dynamic
range)
Keeping the Fn button pressed, rotate the main
command dial to choose an HDR mode, the sub-
command dial to choose Exposure differential
(0 112).
V
Auto ISO
sensitivity
control
Keeping the Fn button pressed, rotate a command
dial to turn auto ISO sensitivity control on or off
(0 72).
W
Multiple
exposure
Keeping the Fn button pressed, rotate the main
command dial to choose the multiple exposure
mode; press the Fn button and rotate the sub-
command dial to choose the number of exposures
(0 149).
None
No operation is performed when the command dials
are rotated while the Fn button is pressed.
f5: Assign Preview Button
G button ➜ A Custom Settings menu