Nikon Df - Page 109

89
r
3 Select a value for green-
magenta.
Press 4 or 2 to highlight the G
(green) or M (magenta) axis and
press 1 or 3 to select a value.
4 Press J.
Press J to save changes and
return to the shooting menu.
If a value other than 0 is
selected for the green (G)–
magenta (M) axis, an asterisk
(“E”) will be displayed in the information display.
❚❚ The L (U) Button
The L (U) button can be used to select the color temperature
for the amber (A)–blue (B) axis only.
Press the L (U) button and
rotate the sub-command dial until the desired value is displayed in
the information display (adjustments are made in mireds; 0 87).
To enter a color temperature directly in increments of 10 K, press
the L (U) button and press 4 or 2 to highlight a digit and
press 1 or 3 to change.
L (U)
button
Sub-command dial Information display
Value for green (G)-magenta
(M) axis