166
t
5 Select Done.
Highlight Done and press J.
The specified focal length and
aperture will be stored under
the chosen lens number.
❚❚ Recalling Non-CPU Lens Data
Lens data for selected non-CPU lenses can be recalled by lens
number as described below.
1 Assign non-CPU lens number selection to a camera
control.
Select Choose non-CPU lens number as the “+ command
dials” option for Custom Setting f4 (Assign Fn button, 0
263
),
Custom Setting f5 (Assign preview button, 0
266
), or f6
(Assign AE-L/AF-L button, 0
267
).
2 Use the selected control to choose the lens number.
Press the selected button and rotate the main command dial
until the desired lens number appears in the information
display.
Focal length
Maximum
aperture
Main command dial
Lens number
To Next Page
Loading...
