298
U
2 Select the first image.
Use the multi selector to
highlight the first photograph
in the overlay.
To view the
highlighted photograph full
frame, press and hold the X
(T) button.
Press J to select the highlighted photograph
and return to the preview display.
3 Select the second image.
The selected image will appear as Image 1.
Highlight Image 2
and press J, then
select the second photo as described in
Step 2.
4 Adjust gain.
Highlight Image 1 or Image 2
and optimize exposure for the
overlay by pressing 1 or 3 to
select gain from values
between 0.1 and 2.0.
Repeat for
the second image.
The default value is 1.0; select 0.5 to halve
gain or 2.0 to double it.
The effects are visible in the Preview
column.
5 Preview the overlay.
Press 4 or 2 to place the cursor
in the Preview column and
press 1 or 3 to highlight
Overlay. Press J to preview
the overlay as shown at right (to
save the overlay without displaying a preview, select Save).
To
return to Step 4 and select new photos or adjust gain, press
W (M).
To Next Page
Loading...
