71
S
A Hi 0.3–Hi 4
The settings Hi 0.3 through Hi 4 correspond to ISO
sensitivities 0.3–4 EV over ISO 12800 (ISO 16000–
204800 equivalent).
Pictures taken at these settings
are more likely to be subject to noise (randomly-
spaced bright pixels, fog, or lines).
A Lo 0.3–Lo 1
The settings Lo 0.3 through Lo 1 correspond to ISO
sensitivities 0.3–1 EV below ISO 100 (ISO 80–50
equivalent).
Use for larger apertures when lighting is
bright.
Contrast is slightly higher than normal; in
most cases, ISO sensitivities of ISO 100 or above are
recommended.
A See Also
For information on using the High ISO NR option in the shooting menu
to reduce noise at high ISO sensitivities, see page 242.
To Next Page
Loading...
