3-82
3
MENU/1: Job
1-4) Control Job
A Control Job stores survey data (such as control points) that may be used
by several jobs as the source of common data. This facility saves time
when surveying a region that already has known points.
Once a Control job is assigned, the system will search the coordinate
points in the Control Job when the input point cannot be found in the
current Job. If the point is found in the Control Job, it will be copied into
the current Job.
A Control Job has the same format as a standard job: it can be opened and
modified. You can use it to record any measured data when you open that
Job as a normal Job.
Move the cursor to the Job you want to
assign as the Control Job.
Press the [MENU] key to display the
sub-function menu, shown right.
Select [3] by pressing the numeric key or
the Down arrow and [ENT] keys.
A confirmation screen is shown.
Press the [ENT] or [4] key to assign the
Job as a control job.
Press the [ESC] or [1] key to cancel the
process.
１ Ｃｒｅａｔｅ
２ ＤＥＬ
３ Ｃｏｎｔｒｏｌ
４ Ｉｎｆｏ．
３
ＭＥＮＵ ｆｏｒ ｏｐｔｉｏｎ
＊ＴＯＫＹＯ１０
ＮＥＷＹＯＲＫ３ ＠
＞ ＩＴＡＬＹ５６ ↓
Ａｓｓｉｇｎ
ＴＥＳＴ―Ａ５５
ａｓ Ｃｏｎｔｒｏｌ Ｊｏｂ？
Ｎｏ Ｙｅｓ
To Next Page
Loading...
Need help?
General
