Chapter 2 Individual Operations
66
Chap. 2
Individual Operations
■ Specimen
Photomicrography of faded specimen sections requires prolonged exposure time and results in poor color
reproduction and low-quality images. Move the specimen to obtain images from a fresh section of the specimen
previously unexposed to excitation light. For best results, use the phase contrast method to select a specimen
section for photomicrography, and then switch to the fluorescent method to capture images.
Adjusting the brightness of the image on the monitor
When observing images captured by the camera and displayed on the monitor, you can adjust the brightness by varying
camera adjustment parameters, such as display mode, exposure mode, photometry mode, exposure compensation, and
image level adjustment.
See the instruction manual of the DS-U3, DS-L4, or the camera’s control software for details.
To Next Page
Loading...
