Chapter 5 Troubleshooting
67
5.3 Electrical
Illumination does not turn on when the light ON/OFF switch is turned on.
Problems Check Items
The AC adapter is not connected to the
microscope main body.
Insert the DC cord of the AC adapter into the DC input
connector. (→ Section 2.2)
No electrical power.
Insert the power cord connected with the AC adapter
into an electrical outlet. (→ Section 2.2)
Flickering or unstable lamp brightness
Problems Check Items
The AC adapter or power cord is not correctly
connected.
Connect correctly. (→ Sections 2.2, 4.6)
To Next Page
Loading...
Need help?
General
