Chapter 7 Specifications
70
7.3 Physical Properties
Model Name: Main Body: ECLIPSE Ei R
External dimensions and
Mass (reference)*:
External dimensions: 198 (W) x 377 (H) x 259 (D) mm (Excluding protrusions)
Mass (reference): Approximately 5.2 kg
* For a set of Ei R and EC-T-TB Binocular eyepiece tube
There are some differences in dimensions and mass depending on the details of the set.
Electrical shock
protection class
Class III
Environmental conditions Operation: Temperature: 0 to +40ºC
Humidity: 60% RH Max. (at +40ºC) (no condensation)
Storage and Transport: Temperature: -20 to +60ºC
Humidity: 90% RH Max. (no condensation)
Altitude: 2,000m Max.
Pollution: Degree 2
Overvoltage category: Category II
Indoor use only
Safety standards
• CE Marking
• IVD Directive
This equipment complies with the emission and immunity
requirements of IEC/EN 61326-2-6.
• Low Voltage Directive
• EMC Directive
• C-UL-US Listed
• FCC Part 15 Subpart B Class A
Note: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the
interference at his own expense.
• CAN ICES-003(A) / NMB-003(A)
• Australian EMI (AS/NZS CISPR11)
To Next Page
Loading...
