13
Specifications
6
Teaching Head F-F, Teaching Head S-S, MTH Main Splitter, MTH Relay Unit
Attachment Magnification: 1x (at both main and secondary observer positions)
Pointer
Y-THP Pointer Unit
Designation: Y-THP
Input Voltage: DC 9 V, 0.5 A max.
Lamp for Arrow Illumination: 6 V - 0.2 A tungsten lamp (average lifetime: 1,000 hours)
Arrow Color: Green or orange (switchable)
Arrow Illumination Voltage: 0 to 6 V (by brightness control that also acts as ON/OFF switch)
Conforming Standards: ● With AC adapter described below.
This product meets EU Low Voltage Directive requirements.
This product meets EU EMC Directive requirements.
This product meets FCC Part 15, Subpart B requirements.
Y-THPL LED Pointer Unit
Designation: Y-THPL
LED for Arrow Illumination: White LED
Arrow Color: Green or orange (switchable)
Arrow Illumination Current: 0 to 20 mA (by brightness control that also acts as ON/OFF switch)
Conforming Standards: ● With AC adapter described below.
This product meets EU Low Voltage Directive requirements.
This product meets EU EMC Directive requirements.
This product meets FCC Part 15, Subpart B requirements.
AC Adapter
For Y-THP and Y-THPL
Designation: SPU16A-104
Input Voltage: AC 100 to 240 V ±10%, 50/60 Hz, 0.4 A
Output Voltage: DC 9 V, 1.66 A
Conforming Standards: UL/GS/PSE Approved.
Only for Y-THP
Designation: 3A-161DB09
Input Voltage: AC 100 to 240 V ±10%, 50/60 Hz, 0.6 A
Output Voltage: DC 9 V, 1.66 A
Conforming Standards: UL/GS/PSE Approved.
To Previous Page
Loading...
Need help?
General
