69
t
Self-Timer Modes
The self-timer can be used to reduce camera shake or for self-
portraits.
1
Display release mode options.
2
Select the desired self-timer option.
3
Mount the camera on a tripod.
Mount the camera on a tripod or place the camera on a sta-
ble, level surface.
4
Frame the photograph and shoot.
Press the shutter-release button half-
way to focus, and then press the but-
ton the rest of the way down. The self-
timer lamp will start to flash and a
beep will begin to sound. Two sec-
onds before the photo is taken, the
lamp will stop flashing and the beep-
ing will become more rapid.
Press 4 (C) to display release mode
options.
Use the multi selector to highlight
E 10 s, E 5 s, or E 2 s and press J.
To Next Page
Loading...
