169
n
Attaching a Power Connector and AC Adapter
Turn the camera off before attaching an optional power connec-
tor and AC adapter.
1
Ready the camera.
Open the battery-chamber/mem-
ory card slot cover.
2
Insert the EP-5C power connector.
Be sure to insert the connector in the
orientation shown, using the connec-
tor to keep the orange battery latch
pressed to one side. The latch locks
the connector in place when the con-
nector is fully inserted.
3
Close the battery-chamber/memory card slot cover.
Position the power connector cable so
that it passes through the power con-
nector slot and close the battery-
chamber/memory card slot cover.
To Next Page
Loading...
