Nikon J3 - Page 23

4
Attach a
lens.
Be
careful
to
prevent dust from entering the camera when the
lens or body cap
is
removed.
•
,.
Mounting
mark
(lens)
Mounting
mark
(camera)
Mounting
mark
(lens)
Keeping marks aligned, position lens on
camera, then rotate
until
it
clicks
into
place.
5
Turn
the
camera on.
Press
the
power
switch
to
turn
the
camera
on.
The
power
lamp
will
briefly light green and the monitor will
turn
on.
Be
sure
to
remove
the
lens
cap before shooting.
Check
the battery level and number
of
Battery level
exposures remaining in the
monitor
(CD
17).
~~(~)
Exposures remaining
21