86
Storage
If
the camera
will
not
be used for
an
extended period, remove
the battery and store
it
in a cool,
dry
area
with the terminal cover
in
place.
To
prevent
mold
or
mildew, store the camera in a dry,
well-ventilated
area. Do
not
store your camera
with
naphtha or
camphor
moth
balls or in locations
that:
• are
poorly ventilated
or
subject
to
humidities
of
over
60°/o
•
are
next
to
equipment
that
produces strong electromagnetic
fields,
such
as
televisions
or radios
•
are
exposed
to
temperatures above
50
oc
(122
°F)
or
below
-10
oc
(14
°F)
Cleaning
Use
a blower
to
remove dust and lint, then wipe gently
with
a soft, dry
cloth.
After using the camera at
the
beach or
sea-
side, wipe
off
sand or salt with a
cloth lightly dampened in
~n~er~lll)dy
!distilled water and dry thoroughly.
Important:
Dust
or
other
foreign
matter
inside the camera
may
cause damage
not
cov-
ered under warranty.
Lenses
are
easily damaged. Remove dust and lint
with
a
blower.
If
using
an
aerosol blower, keep the
can
vertical
to
prevent the discharge
of
liquid.
To
remove fingerprints and
other stains, apply a
small
amount
of
lens
cleaner
to
a soft
cloth
and
clean
with
care.
Remove dust and lint with a blower. When removing finger-
prints and other stains, wipe the surface lightly with a soft
cloth
or chamois leather.
Do
not apply pressure,
as
this
could result in damage or malfunction .
.
The dust shield
is
easily damaged. Remove dust and lint
with a blower.
Do
not
use
alcohol, thinner,
or
other
volatile chemicals.
To Next Page
Loading...
