This
section
lists
the error messages that appear
in
the
display.
Me$sage
Solution
If
the subject
is
too bright, lower
ISO
sensitivity
(Shutter-speed or
or choose a faster shutter speed
or
smaller a per-
ture (higher f-number).
aperture display
If
the subject
is
too
dark,
raise
ISO
sensitivity,
use
flashes)
the flash,
or
choose a slower shutter speed or
larger aperture (lower f-number).
Keeping the zoom ring
A lens
with
a retractable lens barrel
button
is
button
pressed, rotate
attached
with
the lens barrel retracted.
Press
the
the zoom ring
to
retractable lens barrel
button
and rotate the
extend the lens.
zoom ring
to
extend the lens.
Check lens. Pictures
can only be taken
Attach a lens.
when a lens
is
attached.
Start-up error. Turn the
Turn the camera off, remove and replace the
camera
off
and then
battery, and then turn the camera on.
on again.
The clock
has
been
Set
the camera clock.
reset.
No memory card.
Turn the camera
off
and confirm
that
the card
is
correctly inserted.
-
This memory card
is
Select
Yes
to
format the card, or turn the camera
not
formatted. Format
off
and insert another memory card.
the memory card?
Memory card
is
locked
Turn the camera
off
and slide the card write-pro-
(write protected).
teet switch
to
the "write" position.
•
You
may be able
to
record additional images
if
Memory card
is
full.
you reduce image quality or
size.
• Delete unwanted images.
• Insert another memory card.
94
To Next Page
Loading...
