EasyManua.ls Logo

Nikon LS8000 - Accessories

Nikon LS8000
148 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Accessories
After unpacking the scanner, check that the package contains all the items listed below. Con-
tact your retailer immediately should you find that anything is missing or damaged.
FH-835M 35-mm slide mount holder (1)
Use this holder to scan up to five mounted 35-
mm slides.
FH-835S 35-mm strip film holder (1)
This holder is used to scan up to two strips of
35-mm film up to six frames in length.
Masking sheet (2)
Masking sheets are used with the FH-835S 35-
mm strip film holder when scanning a single
strip of film or two strips of unequal lengths.
FH-869S medium-format strip-film holder (1)
Use this holder to scan medium format
(Brownie or 120/220) film strips or 59 mm × 82
mm film for electron microscopes. The num-
ber of frames that can be scanned depends on
the type of film:
6 × 4.5: Up to four frames
6 × 6: Up to three frames
6 × 7 – 6 × 9: Up to two frames
Power cable (1)
(shape of cable depends on country of sale)
IEEE 1394/Firewire interface cable (1)
Use this cable to connect the scanner to your
computer.

Table of Contents

Related product manuals