Nikon N70 AF - Page 83

SELF- TIMER OPERATION
+
1
Press self-timer (SETI'::» button and confirm that.::> starts
blinking
in LCD panel. While pressing SETI'::> button, rotate
command dial one click so
that.::> stops blinking. Then remove
finger from
SET/'::> button.
• To cancel self-timer, press
SET/'::> button and rotate command
dial so that.::> disappears.
2
Look through the viewfinder, lightly press shutter release
button, and confirm focus and exposure.
3
Fully depress shutter release button. The self-timer LED
starts blinking. The shutter will release after 10 seconds.
The self-timer LED blinks for eight seconds, then stops blinking
to tell you get ready for the shot.
To cancel self-timer operation before shooting: Turn the
camera's power off.
• When using any Auto exposure mode, attach the
eyepiece cover (provided)
to the viewfinder eyepiece
before setting self-timer. The eyepiece cover prevents
stray light from entering viewfinder and affecting
exposure.
•
In Single Servo AF mode, self-timer operates only when
in-focus indicator
(e ) appears inside viewfinder.
• Regardless
of film advance mode setting, continuous
shooting is not performed.
• At
owl b setting, shutter will release at around 1/30
sec.
83