Nikon SB-22 - User Manual

Nikon
Autofocus Sp-ee(tligtlt
INSTRUCTION MANUAL

Summary

Basic Operation

Installing Batteries

Attaching Flash Unit to Camera Accessory Shoe

Programmed TTL Auto Flash Shooting

Autofocus Flash Photography

Determining Aperture

TTL Mode

Details for TTL automatic flash exposure control using the SB-22.

A1 or A2 Mode (Non-TTL Automatic Flash)

M Mode (Manual Flash Exposure Control)

MD Mode (Manual Flash Exposure Control with Motor Drive)

Synchro-Sunlight Fill-in Flash Photography

Fill-in Flash in TTL Mode

Using TTL mode for fill-in flash with backlit subjects.

Fill-in Flash in A1 or A2 Mode

Using A1/A2 modes for fill-in flash with backlit subjects.

Fill-in Flash in M Mode

Using M mode for fill-in flash with backlit subjects, managing harsh shadows.

Multiple Flash Photography

TTL Multiple Flash Photography

Setting up multiple flash units for TTL-controlled exposures.

Manual Multiple Flash Photography

Connecting and configuring multiple flash units in manual mode.

Close-Up Flash Photography in TTL Mode

About Batteries

Nikon SB-22 Specifications

General

Zoom Head	No
Power Source	4 x AA batteries
Type	Electronic flash
Flash Coverage	Covers 35mm lens angle of view
Bounce Angle	Up to 90 degrees
Flash Modes	TTL, Manual, Auto
Recycle Time	Approx. 0.2 to 6 seconds
Compatible Cameras	Nikon cameras with ISO hot shoe