Nikon SB-22 - Programmed TTL Auto Flash Shooting

Programmed TTL Auto Flash Shooting (with Nikon F-501/N2020, F-401/N4004 or
F-301/N2000)
Steps 7 through 9 provide instructions for programmed
TTL auto flash shooting wi
th the Nikon F -5 01 /N2020*,
F-401lN4004** or F-301/N2000* camera.
For other flash exposure operations (TTL auto, non-TTL
auto and manual flash exposure operations) s
ee "SET-
TING CAMERA SHUTTER
SPEED " on page 16 and
" DETERMINING
APERTURE, " pages 17 to 32.
* The Nikon N2020 and N2000 are sold exclusively in the
U.S.A.
and Canadian markets.
** The Nikon N4004 is sold exclusively in the U.S.A. market.
~----------------,
"
For programmed TTL automatic flash opera- "
tion, no
te the following:
, • Use
AI -S type lenses only. With Nikon F- 401 1 I
I
N4004, use only AF -Nikkor lenses, except ,
,
AF -Nikkor 80mm f /2.8, 2 00mm f/3.5 IF - ED ,
, and Autofocus Converter
TC-16 / TC-16A. ,
, • For autofocus operation, set the Nikon I
, F-501/N2020's focus mode se lector to S for I
Single Servo Autofocus mode, or set the
, Nikon
F-401 /N4004 to A for autofocus mode. I
I
For details, see pages 13 to 1 5. I
\ I
~----------------~
7. Set the 58-22's flash mode selector
to TTL.
For the flash shooting range in programmed TTL auto-
matic operation, see the table
on page 20.
The patterned bar
in the middle of the flash shooting
distance range indicators also shows the flash shoot-
ing range
in programmed TTL automatic operation.
To read the programmed aperture, set the film speed
knob. The figure at the left of the patterned bar is the
programmed aperture.
9