Nilfisk-Advance 7765 - Page 75

Solution System 180Service Manual – Advance 7765 / Nilsk CR1500
Solution Flow Control
The Solution Control Lever, located to the left
of the Operator, pivots to move the Solution
Control Link up and down. The Solution Control
Link rotates the lever arm on the Ball Valve to
regulate the solution ow.
Note that this a mechanical system and is
not affected by the status of the scrub system,
or whether or not the machine is moving.
Whenever the Solution Control Lever is moved
from the off position, solution will ow to the
scrub deck.
Also note that the solution ow control is the
same for all machines regardless of whether
or not they’re equipped with the ESP/Recycle
option.
Solution From
Solution Tank
Solution To
Scrub Brushes
Ball
Valve
Solution
Control
Lever
Solution
Control
Link