ENGLISH / A-3
FORM NO. 56041634 - Advolution™ 2710 / UHR 70-1700 - A-3
TABLE OF CONTENTS
Page
Introduction ........................................................................................... A-3
Parts and Service ................................................................................. A-3
Nameplate ............................................................................................ A-3
Uncrating the Machine .......................................................................... A-3
Important Safety Instructions ................................................................A-4
Importantes consignes de sécurité .......................................................A-5
Know Your Machine .....................................................................A-6 – A-7
Preparing the Machine for Use
Batteries ............................................................................................... A-8
Installation of the Burnishing Pad ......................................................... A-9
Installation of the Dust Collection Bag ................................................A-10
Operating the Machine
Before Each use ................................................................................. A-11
Plan Your Floor Burnishing ................................................................. A-11
Operating The Machine ...................................................................... A-11
Maintenance
After Use ............................................................................................. A-12
Maintenance Schedule ....................................................................... A-12
Lubricating the Machine .....................................................................A-12
Steering Chain Tension ...................................................................... A-12
Electromagnetic Brake .......................................................................A-12
Charging the Batteries ........................................................................A-13
General Machine Troubleshooting
Error Display .......................................................................................A-14
Swirl Marks ......................................................................................... A-14
Circles on the Floor ............................................................................A-14
Floor Finish Removed ........................................................................ A-14
Machine Wobbles During Operation ................................................... A-14
Machine Does Not Run ......................................................................A-14
Technical Specifi cations ..................................................................... A-15
INTRODUCTION
This manual will help you get the most from your Nilfi sk-Advance Advolution™ 2710 / UHR 70-1700. Read it thoroughly before operating the
machine.
Note: Bold numbers in parentheses indicate an item illustrated on pages A-6 – A-7.
This product is intended for commercial use only.
PARTS AND SERVICE
Repairs, when required, should be performed by Nilfi sk-Advance service personnel using Nilfi sk-Advance original replacement parts and
accessories.
Call Nilfi sk-Advance for repair parts or service. Please specify the Model and Serial Number when discussing your machine.
NAME PLATE
The Model and Serial Number of your machine are shown on the Nameplate on the machine. This information is needed when ordering repair
parts for the machine. Use the space below to note the Model and Serial Number of your machine for future reference.
MODEL ________________________________________________
SERIAL NUMBER ________________________________________
UNCRATING
When the machine is delivered, carefully inspect the shipping packaging and the machine for damage. If damage is evident, save the shipping
carton (if applicable) so that it can be inspected. Contact the Nilfi sk-Advance Customer Service Department immediately to fi le a freight damage
claim. Refer to the unpacking instruction sheet included with the machine to remove the machine from the pallet.
To Next Page
Loading...
Need help?
General
