Nilfisk-Advance E130.3 User Manual

10
Fig. 7
D
Service / Repair.
Disassembly / assembly of start / stop system.
1. The micro-switch box can now be removed by hand, so that there is free access to the
start / stop valve (Fig. 6)
2. The start / stop valve can be removed with a 25 mm spanner.
Check that all parts are correct placed before mounting. (Fig. 7)
Mounting torque: see page 7.
Fig. 6

Nilfisk-Advance E130.3 Specifications

General

Brand	Nilfisk-Advance
Model	E130.3
Category	Pressure Washer
Language	English