To Next PageTo Next PageWhat causes L1 Short in Nilfisk-Advance Scrubber and how to fix it?
The most likely cause of L1 Short is a damaged solenoid with an internal short. Check the coil resistance of the solenoid. If it is significantly below the normal coil resistance of 108 ?, then replace the solenoid.
What to do if my Nilfisk-Advance SC6000 910C Scrubber displays an M1 Overcurrent error?
Possible causes for the M1 Overcurrent error could be a short circuit or a locked motor rotor. Investigate for short circuits or check if the motor rotor is locked.
General| Model | SC6000 910C |
|---|---|
| Type | Scrubber |
| Power Source | Battery |
| Battery Voltage | 24 V |
| Sound Level | 68 dB |
| Drive Speed | 6 km/h |
Explanation of safety symbols and essential operational safety guidelines.
Description of the main controls and switches on the operator panel.
Explanation of the various indicators and data displayed on the machine's screen.
How to access and navigate the machine's information and settings menu.
Explanation of the magnetic smart key system for machine operation.
Detailed steps for performing scrubbing tasks, including safety and adjustments.
Daily, weekly, monthly, and yearly maintenance tasks for the machine.
Common problems and their corresponding causes and remedies.
Explanation of fault code structure, display, and common codes.
How to access and view the machine's fault history log.
