E
Nilfisk
ALTO
Attix7_ver.1.0_140105
3. Disconnect the cable on
the socket (3), undo the
two screws (4) with a Phil-
lips screwdriver, and take
off the case.
4. Fit in the reverse order.
7.5 Removing/fitting power cord (Attix 791-2M/B1)
1. Remove the hood (see 4.7).
2. Remove the power cord (see Attix 590-21EC repair
manual, section E, page 21).
4
4
Attix7 3620
3
Troubleshooting
r h
T o
ubl
e
s
ootin
g