Nilfisk-ALTO Neptune 4 Series User Manual

G
Nilfisk
ALTO
Table G.1: Heat exchanger settings
1. Control board
2. Control Safety Block
3. Heat exchanger system
For adjustment refer to the Neptune 3 Service Manual (chapter G.1).
The adjustment procedure is described in the Neptune 3 Service Manual (chapter G.2) or STI MPW-
030.
The adjustment procedure is described in the Neptune 3 Service Manual (chapter G.3) or STI MPW-005
/ STI MPW-028.
Adjustments
4
CO
2
content
% 10.5 (+ 0.5)
Fuel pressure bar 15 (- 0.5)
Soot rating 0-1
NEPTUNE
4. Flow control
5. Automatic AntiStone
6. Electrical connection
The adjustment procedure is described in the Neptune 3 Service Manual (chapter G.3).
The parameters for adjustment are described in the Neptune 3 Service Manual (chapter G.4).
The adjustment of the star / delta switch is described in the Neptune 3 Service Manual (chapter G.5).
Neptune 4_EN_Ver1.0_04/06
Adjustments
12/21

Nilfisk-ALTO Neptune 4 Series Specifications

General

Model	Neptune 4 Series
Category	Floor Machine
Power	4.8 kW
Weight	91 kg
Pump Pressure	150 bar / 2175 psi
Water Flow	660 l/h / 2.9 GPM
Motor	4.8 kW
Machine Weight	91 kg
Type	Cold Water High Pressure Washer