Nilfisk-ALTO Neptune 4 Series User Manual

Nilfisk
ALTO
There are only minor differences between the
NEPTUNE 4 hot-water high-pressure cleaner and
NEPTUNE 3 and NEPTUNE 5 line of products.
This service manual mainly refers to the
concerning sections in the service manuals
NEPTUNE 3 and NEPTUNE 5
Repair work requires a suitable testing workplace
with the necessary power supply.
If operating errors are evident, refer the customer
to the user manual.
A fault in the cleaner can have a number of causes.
Refer to Chapter E for troubleshooting.
Also refer to the illustrated spare parts list (p
301002627) for your repairs. This shows you the
location of the individual parts and the sequence in
which they are assembled.
Read the ”Service / Technical Information” sheets. They include information on technical modifications
that have been made after this service manual was printed.
”Service / Technical Information” sheets are also valid as a supplement to the spare parts list until a new
edition is published.
Service manuals and “Service / Technical Information” sheets should be available at the place where
repairs are carried out.
Transfer to third parties is not allowed.
Use original spare parts only!
/7.
/n
Nilfisk ALTO
Preface
Neptune 4_EN_Ver.1.0_04/06
Preface
1/21

Nilfisk-ALTO Neptune 4 Series Specifications

General

Model	Neptune 4 Series
Category	Floor Machine
Power	4.8 kW
Weight	91 kg
Pump Pressure	150 bar / 2175 psi
Water Flow	660 l/h / 2.9 GPM
Motor	4.8 kW
Machine Weight	91 kg
Type	Cold Water High Pressure Washer