Nilfisk-ALTO Neptune 4 Series User Manual

A
Nilfisk
ALTO
Safety instructions
For your own safety
Repairs should only be
made by someone who
has received proper
instructions for the job or
who is a qualified
electrician.
Observe national safety directives and
regulations for the electrical engineering
trade, in particular:
IEC 60335-2-69
EN 60335-2-69
Before starting the equipment, be sure to
read the accompanying operator manual,
and keep it close as ready reference.
The equipment should only be used by
persons who have been instructed in its
use and are authorized to do so.
ESD (electrostatic
discharge)
Observe the following ESD precautions before any repair of or near
electronic parts:
Touch the protective conductor to discharge your own body.
Possibly wear an anti-static wrist strap.
Use a conducting floor or tabletop.
Never touch a circuit board or electronic components always hold
it by the plastic or insulation.
Transport electronic parts in conductive packaging (e.g. special
ESD packages).
l
l
l
l
l
Neptune 4_EN_Ver.1.0_04/06
Safety instructions
2/21

Nilfisk-ALTO Neptune 4 Series Specifications

General

Model	Neptune 4 Series
Category	Floor Machine
Power	4.8 kW
Weight	91 kg
Pump Pressure	150 bar / 2175 psi
Water Flow	660 l/h / 2.9 GPM
Motor	4.8 kW
Machine Weight	91 kg
Type	Cold Water High Pressure Washer