NIMO ETS 1700E - Drying Programme; Drying Function

19
DRYING PROGRAMME
The drying cabinet is equipped with two automatic programmes:
AUT 40°
AUT 60°
In addition, the drying cabinet has four time-controlled programmes:
MAN 30°
MAN 40°
MAN 60°
MAN --° Only the fan is used during the drying process – No heat
The automatic programmes shut o the drying process automatically when the
fabrics are dry.
The manually time-controlled programmes come to an end after the set time has
been counted down.
All the 30°, 40° and 60° programmes nish with a cooling down period of 10 minutes.
DRYING FUNCTION
Start the drying programme:
Last used drying programme.
Press the main power switch (1) to the ON position - Indicated by a green light (2)
The display shows the last run programme – If this is the one wanted, press the
START/STOP button (4)
Or select another drying programme described below.
Automatic programmes.
Automatic programme 40°- Press the ” 40°” button (5), then START/STOP (4).
Automatic programme 60°- Press the ” 60°” button (6), then START/STOP (4)
Manual time control.
Using the MAN button (7) to step through to the desired temperature, 30°, 40°, 60° or
only fan. The display shows the standard drying time for the respective programme.
The standard time can, if desired, be increased or reduced with the ”+” (8) or
”-” (9) buttons
After that, the drying programme is started with the START/STOP button (4).
USING THE ETS 1700E / ETS 1900E DRYING CABINET