NIMO ETS 1700E - Fitting the Door Handle; Rehanging the Door

MAN
60°
40°
-
+
MAN 4
0
° 2:30
C
START
STOPP
ON
OFF
ECO DRYER
MAN
60°
40°
-
+
MAN 4
0
° 2:30
C
START
STOPP
ON
OFF
ECO DRYER
MAN
60°
40°
-
+
MAN 4
0
° 2:30
C
START
STOPP
ON
OFF
ECO DRYER

2
1
9
REHANGING THE DOOR
The door can be hung on the right or to the left.
FITTING THE DOOR HANDLE
Fit the door handle with the fixing
screws supplied.
INSTALLATION
1 Lay the drying cabinet on its back.
2 Undo the hinge pin from the bottom
hinge (1) and lift o the door.
3 Undo the plastic plug and insert it in
the opposite-side lower hinge.
A LOWER HINGES ARE PRE-MOUNTED ON BOTH SIDES
4 Undo the hinge pin from the top
hinge (2) and place it on the opposite
side.
5 Rotate the door, align and secure the
door with the lower hinge pin (1).