Usermanual NIMOS Micro-Trac Page 16
Gasoline engine (follow the instructions of the manual of the engine when you carry out maintenance to the engine)
HONDA First Every
Frequency
25 hours 50
3M
hours 100
6M
hours 200
Y
hours
engine oil
R R
air filter C R
oil filter
R
fuel filter
R
cooling system
C
spark plugs
V
M
minimal every month
3M
minimal every three months
6M
minimal every six months
Y
minimal every year
C = cleaning V = check
R = renew G = grease
e
= Option;
6.5 Instructions for adjustment
Bolts must be tightened with the following tighten torques:
Function Torque Bolt Quality
Front wheels 117 Nm M12 10.9
Rear wheels 125 Nm M14 8.8
Pivot frame 280 Nm M16 10.9
Neutral position hydrostatic transmission: engage the parking brake and let the engine run. When you hear the oil flow
through the over-pressure valves (high sound), the neutral position doesn't function well.
Adjust the nuts at the stud on the cross-beam rear till you don't hear the above mentioned sound. Be sure the nuts are
tightened well to lock the setting.
When the machine drives forward, lengthen the screw thread. When the machine drives rear: shorten the srew thread.
To Next Page
Loading...