EasyManua.ls Logo

Nimos Micro-Trac - Disciption

Nimos Micro-Trac
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Usermanual NIMOS Micro-Trac Page 5
1 Disciption
1.1 General discription
Producer of NIMOS products
DROST MACHINES B.V.
Postbus 96 3910 AB RHENEN - HOLLAND
Utrechtsestraatweg 204A 3911 TX RHENEN - HOLLAND
Tel: (31) (0)317 - 619017 Fax: (31) (0)317 – 614447 E-mail:info@nimos.nl
1.2 Users conditions
The NIMOS Micro-Trac is a transporter, which is specially developed for
horticultures, public gardens, cemeteries and market-gardeners.
The answer of NIMOS for your transport problems: the NIMOS Micro-Trac,
comfortable, good overlook, noiseless and very manoeuvrable.
Standard the Micro-Trac is equipped with progressive driving pedal.
Basically the Micro-Trac is equipped with an open control platform with extra
low step and a three-side tipping loading platform.
Optionally the machine can be equipped with front lift, hydraulic PTO with
different functions, etcetera.
Micro-Trac: high transport capacity in narrow areas combined to enlightening of the working circumstances.
The NIMOS Micro-Trac can be delivered with Two-cylinder-four stroke-gasoline engine, environment friendly,
meets the newest Californian Emission-standard (CARB). Fully hydrostatic transmission with high and low
speed with differential lock. Driving speed variable from 0 to 25 km/h. High load capacity: 1200 kg.
Your Micro-Trac Can be delivered with the following options
1. Low pressure tires with high flotation, especially for lawns.
2. Open control platform, second seat, top and cabin can be delivered.
3. Simple and light control.
4. Fully hydraulic steering.
5. Electrically controlled tipping platform;
6. PTO pump 21 l/min at 175 bar with quick couplings at the front and/or rear;
7. Front lift with single acting cylinder;
8. Double acting functions
9. Water installation;
10. Extra sides;
11. Trailer coupling;
For special wishes consult factory.