11 12CUSTOMER CARE - AU: 1800 099 385CUSTOMER CARE - NZ: 0800 112660
Programs, Speed Settings & Uses for the Pitcher
FUNCTION CONTAINER
BLADE TYPE
SPEED or PROGRAM TYPE OF FOOD
Processing Pitcher
Stacked Blade
Assembly
Auto-iQ
®
Puree
Medium
Dips
Batters
Chopping Pitcher
Stacked Blade
Assembly
Auto-iQ Pulse
High
Salsa
Vegetables
Nuts
Frozen Drinks /
Ice Crush
Pitcher
Stacked Blade
Assembly
Auto-iQ Frozen Drinks/
Smoothies
Ice
Frozen Drinks
Pureeing Pitcher
Stacked Blade
Assembly
Auto-iQ Puree
Smoothies
Soups*
Milkshakes
Programs, Speed Settings & Uses for the Nutri Ninja
®
Cup
FUNCTION CONTAINER
BLADE TYPE
SPEED or PROGRAM TYPE OF FOOD
Smoothies
Nutri Ninja Cup
XL Multi-serve
1.4 L Ninja Jar
Stainless Steel
Ninja
®
Cup
Pro Extractor
Blades
™
Assembly
Nutri Ninja Auto-iQ
Blend
Smoothies
Frappes
Milkshakes
Protein Drinks
Green Smoothies
Nutri Ninja Cup
XL Multi-serve
1.4 L Ninja Jar
Stainless Steel
Ninja Cup
Pro Extractor
Blades
Assembly
Nutri Ninja Auto-iQ Ultra
Blend
Frozen Fruits
Frozen Vegetables
Kale
Celery
Spinach
Seeds
Ice
Grating Nutri Ninja Cup
Pro Extractor
Blades
Assembly
Auto-iQ Pulse
High
Grated Cheese
Bread Crumbs
Chopping Nutri Ninja Cup
Pro Extractor
Blades
Assembly
Auto-iQ Pulse
High
Salsa
Vegetables
Nuts
Care & Maintenance
HOW TO STORE
1 Store the Nutri Ninja
®
|
Ninja
®
Blender Duo with
AUTO-iQ
®
Technology upright with the blade assembly
inside the corresponding container with the lid secured
on top. Do not place anything on top. Store the rest
of the attachments in a safe place where they will not
be damaged and won’t cause harm. Loosely wrap the
power cord around the motor base.
NOTE:
Do not store blended or unblended ingredients in
the Nutri Ninja Cup with the blade assembly attached.
RESETTING THE MOTOR THERMOSTAT
Store the
Nutri Ninja
|
Ninja Blender Duo with AUTO-iQ
Technology
features a unique safety system which
prevents damage to the unit’s motor and drive system
should you inadvertently overload your appliance. If
the appliance is being overloaded, the motor
will stop. Allow the appliance to cool for
approximately 15 minutes. To reset the appliance,
follow the resetting procedure below:
1
Unplug the appliance from the electrical outlet.
2
Remove and empty the container and ensure that
no food is jamming the blade assembly.
3
Allow the appliance to cool for approximately
15 minutes.
4
Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5
Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1 Separate/remove all parts from each other.
2 Hand Washing:
Wash the containers, lids, blade
assemblies and attachments in warm, soapy water
.
When washing the blade assemblies, use a dish-washing
utensil with a handle to avoid direct hand contact with
blades. Handle blade assemblies with care to avoid
contact with sharp edges. Rinse and air dry thoroughly.
Dishwasher: The containers, lids, blade assemblies
and attachments are all dishwasher safe. The lids
and blade assemblies are top rack dishwasher safe.
Ensure that the blade assemblies are removed from the
containers before placing in the dishwasher.
WARNING: Handle the Blade Assemblies with
care when washing, as the blades are sharp.
Contact with the blades’ edges can result
in laceration.
3 Wipe the motor base clean with a damp cloth
.
If the appliance needs servicing, please call customer care
at AU: 1800 099 385 or NZ: 0800 112 660.
CAUTION: Do not blend dry ingredients unless pulsing for short intervals per the instructions. Continuous
blending dry ingredients will overheat the blender.
* When blending sauces and soups, make sure they’re cooled to room temperature first - Ninja
®
containers are not intended for
hot blending.
To Next Page
Loading...
