13ninjakitchen.com
12 ninjakitchen.com
11 For storage, only use the spout lid
to cover.
12 Be sure to store the Pro Extractor
Blades Assembly attached to an empty
cup when not in use.
13 Make sure that the motor base is
unplugged when not in use.
14 To release the motor base from the
counter or table top, place your hands
underneath both sides of the motor
base and gently pull the unit up and
towards you.
1 Place the motor base on a clean, dry, level
surface such as a counter or table top.
2 Add ingredients to the Nutri Ninja cup.
3 Place the Pro Extractor Blades®
Assembly onto the cup and tightly
screw it on clockwise until you have a
good seal.
4 Turn the Nutri Ninja cup upside down
and place it onto the motor base, aligning
the tabs on the cup with the motor base.
Rotate the Nutri Ninja cup clockwise until
it is locked in place, you will hear a click
when the lock is engaged. Turn the power
button on, the Nutri Ninja button and
Pulse will illuminate.
IMPORTANT: Review all warnings on
pages 4–7 before proceeding.
USING THE NUTRI NINJA® CUP
5 Press down on the Pulse button in
short intervals to break down tough
ingredients. Press the Nutri Ninja button
to activate the 30 second continuous
run. The unit will stop after 30 seconds.
6 Once you have reached your desired
consistency, turn the power button o
and wait for the Pro Extractor Blades
Assembly to stop turning. Turn the Nutri
Ninja cup counterclockwise and pull
straight up to remove.
7 Turn the cup upright and remove the Pro
Extractor Blades Assembly by twisting
the blade assembly counterclockwise.
8 Turn the cup upright and remove the
Pro Extractor Blades Assembly by
twisting counter clockwise.
9 Do not store blended contents with the
Pro Extractor Blade Assembly attached.
10 Place the spout lid onto the Nutri Ninja
cup, twist to seal and enjoy.
NOTE: DO NOT overfill. To avoid spilling,
do not add ingredients past the Max
fill line.
NOTE: To order additional Nutri
Ninja® Cups, please visit our website:
ninjakitchen.com or feel free to contact
customer service: 1-877-646-5288.
To Next Page
Loading...
