17ninjakitchen.com
16 ninjakitchen.com
CARE & MAINTENANCE
CLEANING
Separate all parts. Wash all containers in
warm, soapy water with a soft cloth.
• Hand-Washing
Wash the containers, lids and blade
assemblies in warm, soapy water. When
washing the blade assemblies, use a
dish-washing utensil with a handle to
avoid direct hand contact with blades.
Handle blade assemblies with care to
avoid contact with sharp edges. Rinse
and air dry thoroughly.
• Dishwasher
The containers, lids, blade assemblies
and attachments are all dishwasher safe.
The lids and blade assemblies are top
rack dishwasher safe. Ensure the blade
assembly is removed from the container
before placing in the dishwasher.
• Motor Base
Turn o the unit and unplug the motor
base before cleaning. Wipe motor base
with a clean, damp cloth.
NUTRI NINJA
®
PRO EXTRACTOR
BLADES
®
ASSEMBLY
When washing the Pro Extractor Blades
Assembly, do not attempt to remove the
seal. Removing the seal can cause damage
to the seal which can result in improper
reassembly and leaking.
If the blade seal becomes loose or if any
servicing needs to be performed on the
appliance, please call customer service at
1-877-646-5288.
STORING
Store the Ninja® Professional Kitchen
System upright with the blade assembly
inside the corresponding container with the
lid secured on top. Do not place anything
on top. Store the rest of the attachments
in a safe place where they will not be
damaged and won’t cause harm. Loosely
wrap the power cord around the cord wrap
on the back of the motor base.
RESETTING THE MOTOR
The Ninja Professional Kitchen System
features a unique safety system which
prevents damage to the unit’s motor and
drive system should you inadvertently
overload your appliance. If the appliance
is being overloaded, the motor will
stop. Allow the appliance to cool for
approximately 15 minutes. To reset
the appliance, follow the resetting
procedure below:
1 Unplug the appliance from the
electrical outlet.
2 Remove and empty the container and
ensure that no food is jamming the
blade assembly.
3 Allow the appliance to cool for
approximately 15 minutes.
4 Re-install the container onto the base
and re-plug the appliance into the
electrical outlet.
5 Proceed to use the appliance as
before making sure not to exceed the
recommended maximum capacities.
ORDERING REPLACEMENT PARTS
To order additional parts and attachments,
visit ninjaaccessories.com.
SPEED SETTINGS & USES
FUNCTION CONTAINER ATTACHMENT SPEED BUTTON TYPE OF FOOD
Small Batch
Blending
Nutri Ninja® Cup
Pro Extractor
Blades®
Assembly
NUTRI NINJA®
Ultra Smooth Nutrient
Extractions*/Smoothies
Ultra Smooth Purees
Sauces**
Ultra Smooth Soups**
Small Batch
Chopping
Nutri Ninja Cup
Pro Extractor
Blades Assembly
PULSE Chopped Nuts
Small Batch
Processing
Nutri Ninja Cup
Pro Extractor
Blades Assembly
PULSE, held down
Crushed Ice
Ice to Snow
Grated Hard Cheese
Dough Making Food Processor
Dough Blade
Assembly
1
DOUGH
Bread Dough
Pie Dough
Pizza Dough
Pretzel Dough
Cookie Dough
Pasta Dough
Batters Food Processor
Chopping Blade
Assembly
2
MIX
Cakes
Muns
Pancake Batter
Cheesecake
Brownies
Dressings and
Sauces
Food Processor
Chopping Blade
Assembly
3
PUREE
Vinaigrettes
Aiolis
Sauces**
Marinades
Purees and Dips Food Processor
Chopping Blade
Assembly
4
BLEND
Pestos
Hummus
Vegetable Purees
Fruit Purees
Cream Cheese Dips
Chopping Food Processor
Chopping Blade
Assembly
PULSE
Vegetables
Chopped Salads
Chutneys
Burgers
Sausage Patties
Meatballs
Meatloaf
Eggs Pitcher
Stacked Blade
Assembly
2
MIX
Omelets
Scrambled Eggs
Stratas
Frittatas
Nut Butters Pitcher
Stacked Blade
Assembly
3
PUREE
Almond Butter
Peanut Butter
Soups and
Sauces**
Pitcher
Stacked Blade
Assembly
4
BLEND
Tomato Soup**
Tomato Sauce**
Root Vegetable Soup**
Large Batch
Drink Making
Pitcher
Stacked Blade
Assembly
5
CRUSH
Frozen Cocktail
Milkshakes
Frappes
Smoothies
* Extract a nutritious drink containing vitamin and nutrients from fruits and veggies.
** When blending soups or sauces, make sure they’re cooled to room temperature first. Ninja containers
are not intended for hot blending
To Next Page
Loading...
