16
9 To pour out thinner
mixtures, ensure the lid is
locked in place, then open
the pour spout cap.
10 For thicker mixtures
that cannot be emptied
through the pour spout,
remove the lid and
Stacked Blade Assembly
before pouring. To
remove the lid, press the
RELEASE button and lift
the handle. To remove the
blade assembly, carefully
grasp it by the top of the
shaft. The pitcher can then
be emptied.
11 Unplug the unit when
finished. To release the
motor base, place your
hands underneath both
sides of the motor base
and gently pull the unit up
and towards you. Refer
to page 29 for storing
instructions.
To Next Page
Loading...
Need help?
General
