21
TIP: If the blade assembly
is not fully seated, you will
not be able to install and
lock the lid into position.
TIP: To learn more about
the unit’s programs, refer
to page 12.
NOTE: Pre-set programs
have pauses and changes in
speed throughout the cycle.
NOTE: DO NOT add
ingredients before installing
the blade assembly.
USING YOUR PRECISION
PROCESSOR™ BOWL
IMPORTANT: Review all
warnings on pages 3–6
before proceeding.
1
Place the unplugged motor
base on a clean, dry, and
level surface such as a
countertop or table. Press
downward on the motor
base to adhere the suction
cups to the work surface.
Plug the motor base into a
wall outlet.
2 Lower the Precision
Processor bowl onto the
motor base.
To Next Page
Loading...
Need help?
General
