Ninja Master Prep Owner's Guide

12
1-877-646-5288
Using the Master Prep
®
Bowl
CAUTION: Blades are sharp! Use extreme caution when
handling the blades. Always hold them by the shaft.
IMPORTANT: Never run the appliance empty.
WARNING: DO NOT crush ice in 16oz Chopper bowl
or damage may occur to the unit.
1 Place the Master Prep
®
bowl on a clean, dry, level
surface.
2 Holding the lower blade by the shaft, place it over the
spindle pin inside the Master Prep
®
bowl. (fig. 1)
3 Carefully insert the upper blade over the lower blade
rotating it until it locks onto the lower blade. (fig. 2)
IMPORTANT: Always assemble the blades inside the
container.
WARNING: DO NOT try to place the blades onto the
power head and then into the Master Prep
®
bowl.
4 Place the food that you want to process into the Master
Prep
®
bowl.
IMPORTANT: Never add ingredients into the Master
Prep
®
bowl before placing the blade assembly in first.
NOTE: DO NOT add more than 2 cups dry or 1 cup
liquid ingredients as this will strain the motor and may
cause overflow.
2
1
Shaft

Ninja Master Prep Specifications

General

Power	400 Watts
Dishwasher Safe	Yes
Number of Speeds	2
Model Number	QB1004
Pulse Technology	Yes
Material	Plastic
Container Capacity	48 oz (pitcher), 16 oz (chopper bowl)
Included Components	48 oz pitcher, 16 oz chopper bowl