11
➀ Contact End -
Insert into Test Port with blocks
(contacts) facing up
.
➁ Sample Tip -
Touch to top of sample (fresh,
capillary or venous blood or Control Solution)
aer inserting Contact End into Meter.
Sample Placement
Correct Incorrect
•
Do not touch Sample Tip to drop of sample
unless Contact End is inserted into Meter.
• Do not apply blood or Control Solution to top
of Test Strip.
• Do not smear or scrape drop with Test Strip.
• Do not apply more sample to the Test Strip
aer testing begins.
• Do not insert Sample Tip with sample into
Meter for testing. May damage Meter.
Test Strip
12
Top of Test Strip
Tyou_OB_Guts_E4GBY03FDr20.indd 11 11/8/13 1:43 PM
To Next Page
Loading...
