- 39 -
2.6 Gate Permission
Use this menu to set the permission time of the access control
system. The following three submenus are provided.
Ｇａｔｅ Ｐｅｒｍｉｓｓｉｏｎ
１．Ｄａｔｅ
２．Ｔｉｍｅ ［Ｆｒｏｍ］
３．Ｔｉｍｅ ［Ｔｏ］
n Date
Specify days of the week when the terminal is enabled. By default,
all days of the week are checked with 『*』. The terminal is enabled
on the day with the mark . Use the direction keys to move to the
day and press the Enter key to set the availability. If you press the
Enter key on an enabled day with the check mark, it becomes
disabled. Keep in mind that access is prohibited on disabled days.
Ｄａｔｅ
Ｍｏｎ ＊
Ｔｕｅ ＊
Ｗｅｄ ＊
Ｔｈｒ ＊
Ｄａｔｅ
Ｆｒｉ ＊
Ｓａｔ ＊
Ｓｕｎ ＊
Ｓａｖｅ ＆ Ｅｘｉｔ
When you complete the setting, select 『Ｓａｖｅ ＆ Ｅｘｉｔ』.
To Next Page
Loading...
