- 46 -
2.8 Factory Initialization
Use this menu to initialize the current settings to factory defaults.
To use『ＦＰ Ｎｕｍｂｅｒ』 or 『ＩＤ Ｌｅｎｇｔｈ』, you must
delete all users because they are not available if there is left any
one registered user.
Ｆａｃｔｏｒｙ Ｉｎｉ．
１．ＤＢ Ｆｏｒｍａｔ
２．ＦＰ Ｎｕｍｂｅｒ
３．ＩＤ Ｌｅｎｇｔｈ
4．R e s e t T e r m
n DB Format
Format the flash memory where user information is stored and the
memory where log information is stored. If you select DB Format,
the following message appears.
ＤＢ Ｆｏｒｍａｔ
ＹＥＳ ／ ＮＯ
Choose “YES” to start formatting. The following message will
appear, showing you that formatting is in progress.
Ｆｏｒｍａｔｉｎｇ…
To Next Page
Loading...
