- 42 -
2.7 Network
Use this menu to set the network environment to connect the
terminal to the network. The following four submenus are provided.
Move to the submenu you want to choose with the direction keys
and press the Enter key.
Ｎｅｔｗｏｒｋ
１．Ｔｅｒｍｉｎａｌ ＩＤ
２．ＴＣＰ／ＩＰ
３．Ｎ／Ｗ Ｔｉｍｅｏｕｔ
４．Ｐｏｒｔ Ｎｕｍｂｅｒ
n Terminal ID
Set a unique ID for the terminal. Considering that several terminals
can be connected to the server via the network, make sure that the
ID matches the one specified in the management program.
Ｔｅｒｍｉｎａｌ ＩＤ
（１－２５５） ： １
n TCP/IP
Set TCP/IP of the terminal.
① DHCP
You can decide whether to use DHCP that automatically assigns
IP addresses to network clients. If you choose to use DHCP by
selecting 『ON』, you can skip step ② and ③.
To Next Page
Loading...
