- 59 -
Ｍｏｄｉｆｙ Ｕｓｅｒ
１．ＦＰ
２．Ａｕｔｈｅｎ． Ｍｏｄｅ
３．Ｕｓｅｒ Ｔｙｐｅ
４．Ｇｒｏｕｐ ＩＤ
５．Ｐａｓｓｗｏｒｄ
６．Ｃｈａｎｇｅ ＲＦ
• Fingerprint
Change the fingerprint of each registered user. As you did in the
first fingerprint enrollment, input the fingerprint twice. After the
first input, take your finger off, and then input the fingerprint
again.
Place the fingerprint on the sensor.
Ｐｌａｃｅ ＦＰ １
If the following screen appears after the first fingerprint input,
take your finger off from the sensor.
Ｒｅｍｏｖｅ ＦＰ
Place the same fingerprint again.
To Next Page
Loading...
